Combination Wrench Size Chart: Complete Sizes Guide

A combination wrench is one of the most useful hand tools for automotive repairs, mechanical maintenance, plumbing, and general workshop projects. It combines two different wrench designs into one tool: an open-end jaw on one side and a closed box-end ring on the other. Both ends are typically designed for the same fastener size, making the tool versatile and convenient for everyday repair work.

Choosing the correct combination wrench size is important for getting a secure fit and preventing damage to nuts and bolts. These wrenches are available in metric and SAE measurements, with different handle lengths, head angles, and box-end configurations.

This combination wrench size chart explains common metric and SAE sizes, inch-to-millimeter conversions, wrench types, and practical applications. You will also learn how to choose the right wrench, understand its measurements, use it correctly, and avoid common sizing mistakes.

Combination Wrench Size Chart

Combination wrench sizes refer to the width across the flats of the nut or bolt head that the wrench is designed to fit. Both the open end and the box end generally have the same nominal opening size.

For example, a 10 mm combination wrench has a 10 mm open-end opening and a 10 mm box-end opening.

The following chart lists common metric combination wrench sizes and their approximate SAE equivalents.

Metric Wrench Size Approximate SAE Equivalent Common Applications
6 mm 1/4 inch Small mechanical fasteners
7 mm 9/32 inch Small equipment repairs
8 mm 5/16 inch Light mechanical work
9 mm 11/32 inch Small fittings
10 mm 3/8 inch Automotive and general repairs
11 mm 7/16 inch Mechanical maintenance
12 mm 15/32 inch General workshop work
13 mm 1/2 inch Automotive repairs
14 mm 9/16 inch Medium mechanical fasteners
15 mm 19/32 inch Vehicle maintenance
16 mm 5/8 inch Machinery and equipment
17 mm 21/32 inch Automotive applications
18 mm 11/16 inch Mechanical equipment
19 mm 3/4 inch Automotive and industrial work
20 mm 25/32 inch General machinery
21 mm 13/16 inch Larger mechanical fasteners
22 mm 7/8 inch Automotive and industrial repairs
24 mm 15/16 inch Large fasteners
27 mm 1-1/16 inches Heavy-duty applications
30 mm 1-3/16 inches Industrial machinery
32 mm 1-1/4 inches Large mechanical fasteners

Important: SAE equivalents are approximate dimensional comparisons, not recommendations for interchangeable use. A metric wrench and an SAE wrench with similar measurements may not fit a fastener equally well. Always use the exact size specified for the fastener.

SAE Combination Wrench Size Chart

SAE combination wrenches are measured in fractions of an inch. They are commonly used with inch-based fasteners found in American-made vehicles, older machinery, industrial equipment, and mechanical systems.

The following chart includes common SAE combination wrench sizes and their approximate metric conversions.

SAE Wrench Size Decimal Equivalent (Inches) Approximate Metric Equivalent
1/4 inch 0.250 6.35 mm
5/16 inch 0.3125 7.94 mm
3/8 inch 0.375 9.53 mm
7/16 inch 0.4375 11.11 mm
1/2 inch 0.500 12.70 mm
9/16 inch 0.5625 14.29 mm
5/8 inch 0.625 15.88 mm
11/16 inch 0.6875 17.46 mm
3/4 inch 0.750 19.05 mm
13/16 inch 0.8125 20.64 mm
7/8 inch 0.875 22.23 mm
15/16 inch 0.9375 23.81 mm
1 inch 1.000 25.40 mm
1-1/16 inches 1.0625 26.99 mm
1-1/8 inches 1.125 28.58 mm
1-1/4 inches 1.250 31.75 mm
1-5/16 inches 1.3125 33.34 mm
1-3/8 inches 1.375 34.93 mm
1-1/2 inches 1.500 38.10 mm

SAE combination wrenches are useful when working with fasteners manufactured to inch-based standards. A complete SAE wrench set provides convenient coverage for common mechanical and automotive repairs.

Metric Combination Wrench Size Chart

Metric combination wrenches are widely used in modern vehicles, machinery, appliances, and general mechanical equipment.

The following chart covers commonly available metric sizes and their approximate decimal-inch conversions.

Metric Wrench Size Decimal Equivalent (Inches) Common Applications
6 mm 0.236 Small equipment
7 mm 0.276 Compact fasteners
8 mm 0.315 Small automotive components
9 mm 0.354 Mechanical fittings
10 mm 0.394 Automotive repairs
11 mm 0.433 General maintenance
12 mm 0.472 Mechanical equipment
13 mm 0.512 Vehicle fasteners
14 mm 0.551 Medium fasteners
15 mm 0.591 Automotive maintenance
16 mm 0.630 Machinery
17 mm 0.669 Automotive repairs
18 mm 0.709 Mechanical equipment
19 mm 0.748 Automotive and machinery
20 mm 0.787 Larger fasteners
21 mm 0.827 Heavy equipment
22 mm 0.866 Industrial and automotive work
24 mm 0.945 Large mechanical fasteners
27 mm 1.063 Heavy-duty applications
30 mm 1.181 Industrial machinery
32 mm 1.260 Large equipment

Not every combination wrench set contains every size. Smaller sets usually cover common fasteners, while professional and industrial sets often include a wider range.

Combination Wrench Size in Inches and Millimeters

Combination wrenches are available in both metric and inch-based measurements. Understanding the conversion between these systems helps when comparing tools and identifying fastener sizes.

One inch equals exactly 25.4 millimeters.

To convert inches into millimeters, multiply the inch measurement by 25.4. To convert millimeters into inches, divide the millimeter measurement by 25.4.

For example:

  • 1/4 inch equals 6.35 mm.
  • 5/16 inch equals 7.94 mm.
  • 3/8 inch equals 9.525 mm.
  • 1/2 inch equals 12.7 mm.
  • 5/8 inch equals 15.875 mm.
  • 3/4 inch equals 19.05 mm.
  • 1 inch equals 25.4 mm.

The following reference chart provides common conversions.

SAE Measurement Metric Equivalent
1/4 inch 6.35 mm
5/16 inch 7.94 mm
3/8 inch 9.53 mm
7/16 inch 11.11 mm
1/2 inch 12.70 mm
9/16 inch 14.29 mm
5/8 inch 15.88 mm
11/16 inch 17.46 mm
3/4 inch 19.05 mm
13/16 inch 20.64 mm
7/8 inch 22.23 mm
15/16 inch 23.81 mm
1 inch 25.40 mm

These conversions are useful for understanding approximate size relationships. However, use the exact metric or SAE wrench size specified for the fastener rather than relying on a close conversion.

What Do Combination Wrench Sizes Mean?

A combination wrench size identifies the width across the flats of the nut or bolt head that the tool is designed to fit.

For example, a 13 mm combination wrench has a 13 mm opening on its open end and a matching 13 mm box-end opening.

The size does not refer to the overall handle length. A 13 mm combination wrench may have a handle several inches long, but both working ends are designed for the same nominal fastener size.

Three measurements are useful when comparing combination wrenches:

1. Wrench Opening Size

This is the distance between the gripping surfaces of the open end or the corresponding internal surfaces of the box end. It determines which fastener size the wrench can fit.

2. Overall Handle Length

This measures the distance from one end of the wrench to the other. Longer handles generally provide more leverage, while shorter wrenches are easier to use in confined spaces.

3. Head Thickness and Offset

Head thickness affects access to fasteners in narrow locations. The angle of the heads also determines how much clearance is available around nearby components.

Different Types of Combination Wrenches

Combination wrenches are available in several designs. Their head shape, handle profile, and box-end configuration determine which applications they are best suited for.

1. Standard Combination Wrench

A standard combination wrench has an open end on one side and a closed box end on the other. Both ends generally have the same nominal size.

It is commonly used for automotive repairs, machinery maintenance, and general mechanical work.

2. 6-Point Combination Wrench

A 6-point combination wrench has six internal contact surfaces in its box end. These surfaces are designed to fit the six flat sides of a compatible hexagonal fastener.

This design is often preferred for tight fasteners because it provides broad contact with the fastener flats.

3. 12-Point Combination Wrench

A 12-point combination wrench has twelve internal contact positions. This allows the box end to engage a fastener at smaller rotational intervals than a 6-point design.

It is useful when there is limited room to reposition the tool between turns. However, the correct size and fit remain essential.

4. Offset Combination Wrench

An offset combination wrench has angled heads that provide additional clearance around nearby components.

It is useful when working around brackets, engine parts, recessed fasteners, and other obstacles that make a straight wrench difficult to position.

5. Ratcheting Combination Wrench

A ratcheting combination wrench includes a ratcheting mechanism in the box end. It allows repeated turning without removing the wrench after every short movement.

This design can save time when working in restricted spaces. Ratcheting mechanisms have specific torque limitations, so follow the manufacturer’s instructions.

6. Flex-Head Combination Wrench

A flex-head combination wrench has a movable or pivoting box end. This allows the head angle to change, making it easier to reach fasteners located behind or beside other components.

It is especially useful for automotive and machinery maintenance.

7. Stubby Combination Wrench

A stubby combination wrench has a shorter handle than a standard wrench of the same opening size. Its compact design makes it useful in confined areas where a longer handle cannot move freely.

8. Long-Pattern Combination Wrench

A long-pattern combination wrench has a longer handle than a standard model. It can provide additional leverage and reach, although the amount of force applied must remain appropriate for the fastener and tool.

Related Guide:

6-Point vs. 12-Point Combination Wrenches

The box-end design is an important consideration when choosing a combination wrench. The two most common configurations are 6-point and 12-point.

Feature 6-Point Combination Wrench 12-Point Combination Wrench
Internal Contact Positions 6 12
Engagement Intervals Every 60 degrees Every 30 degrees
Repositioning Requires more movement Allows smaller repositioning
Typical Use Tight or demanding fasteners Restricted working spaces
Grip Preference Often preferred for high-force work Convenient for limited access
Fastener Compatibility Standard hex fasteners Compatible hex and some 12-point fasteners, depending on design

A 6-point combination wrench is often a good choice for stubborn fasteners because it engages the flats of a compatible hex fastener. A 12-point design is convenient when there is limited room to reposition the tool.

If a fastener is already rounded or damaged, neither design is guaranteed to provide a secure grip. An appropriate extraction tool may be necessary.

Related Guide:

How to Choose the Right Combination Wrench Size

Selecting the correct combination wrench helps prevent slipping, damaged fasteners, and unnecessary effort.

1. Identify the Fastener Measurement

Determine whether the fastener uses metric or SAE sizing. Measure the distance across the flats of a hexagonal nut or bolt head if the size is unknown.

A caliper can provide a more accurate measurement than estimating by eye.

2. Choose the Exact Wrench Size

Select a wrench that matches the fastener measurement. For example, use a 13 mm wrench for a compatible 13 mm fastener and a 1/2-inch wrench for a compatible 1/2-inch fastener.

Do not assume that similar metric and SAE sizes are interchangeable.

3. Consider the Box-End Configuration

A 6-point box end is often suitable for demanding work on hexagonal fasteners. A 12-point design offers more positioning options when space is limited.

4. Check the Open-End Fit

The open end should fit closely around the fastener. Excessive clearance can increase the risk of slipping and rounding the fastener corners.

5. Choose a Suitable Handle Length

Longer handles generally provide more leverage, but they also require additional working space. Select a length that provides good control without making the wrench difficult to position.

6. Consider Head Clearance

Check whether the fastener is close to another component. An offset or flex-head design may provide better access than a standard straight wrench.

7. Match the Tool to the Job

For routine automotive and mechanical repairs, a metric or SAE combination wrench set can cover many common fastener sizes. Specialized work may require a particular head profile, length, or ratcheting mechanism.

Related Guide:

Common Combination Wrench Sizes for Automotive Work

Combination wrenches are widely used in automotive maintenance because vehicles contain many nuts, bolts, brackets, and threaded connections.

The exact sizes required vary by vehicle manufacturer, model, production year, and component.

Metric Wrench Size Common Automotive Applications
8 mm Small brackets and fittings
10 mm Battery-related hardware and small components
12 mm General vehicle fasteners
13 mm Brackets and mounting hardware
14 mm Engine and mechanical components
15 mm Selected mounting and suspension fasteners
17 mm Larger mechanical fasteners
19 mm Wheel-related and other mechanical applications
21 mm Larger automotive fasteners
22 mm Selected suspension and drivetrain components

This is a general reference rather than a vehicle-specific repair guide. Consult the vehicle service manual to identify the correct wrench size and tightening torque for each component.

How to Use a Combination Wrench Correctly

Proper technique helps improve fastener contact and reduces the risk of slipping.

Step 1: Inspect the Wrench

Check the open end, box end, and handle for cracks, deformation, or excessive wear. Do not use a damaged wrench.

Step 2: Confirm the Fastener Size

Identify whether the fastener uses metric or SAE measurements. Select the matching wrench size.

Step 3: Choose the Appropriate End

Use the open end when side access is necessary or the box end when a more secure grip is preferred and the wrench can fit over the fastener.

Step 4: Position the Wrench

Place the selected end completely and correctly onto the fastener. Make sure the gripping surfaces engage the flats.

Step 5: Check the Fit

The wrench should fit closely without excessive movement. If it rocks or slips, stop and confirm the size.

Step 6: Apply Controlled Force

Turn the wrench smoothly in the required direction. Avoid sudden jerking movements or excessive force.

Step 7: Reposition When Necessary

If there is not enough room for a full turn, remove the wrench and reposition it. A 12-point or ratcheting box end may be useful in restricted spaces.

Step 8: Use a Torque Wrench for Final Tightening

When a fastener has a specified torque requirement, use a suitable calibrated torque wrench. A standard combination wrench does not measure tightening torque.

Combination Wrench vs. Adjustable Wrench

Both tools are used for turning nuts and bolts, but their designs and advantages are different.

Feature Combination Wrench Adjustable Wrench
Opening Fixed size Movable jaw
Head Design Open end and box end Adjustable parallel jaws
Fastener Fit Precise when correctly sized Depends on jaw adjustment
Flexibility Requires multiple sizes One tool fits several sizes
Grip Security Box end generally provides secure contact Can slip if poorly adjusted
Common Use Automotive and mechanical work General repairs and maintenance

A combination wrench is often preferable when you know the exact fastener size and need a secure fit. An adjustable wrench is useful when working with different fastener sizes and carrying several fixed-size tools is inconvenient.

Common Combination Wrench Sizing Mistakes

Selecting the wrong wrench or using it incorrectly can damage fasteners and make repairs more difficult.

Using a Similar but Incorrect Size

A wrench that is slightly too large may slip and round the fastener corners. Always use the exact metric or SAE size.

Confusing Metric and SAE Measurements

Some metric and SAE sizes are close in dimension, but they are not necessarily interchangeable. Use the measurement system specified for the fastener.

Ignoring 6-Point and 12-Point Differences

A 6-point box end is often preferred for demanding work on hex fasteners, while a 12-point design provides more positioning options. Choose according to the application.

Using the Wrong Wrench Profile

A standard wrench may not fit around recessed fasteners or nearby obstacles. An offset or flex-head design may provide better clearance.

Applying Excessive Force

A standard combination wrench is not designed to handle unlimited torque. Avoid adding extensions or striking the handle unless the manufacturer specifically permits that use.

Using a Worn Wrench

Worn gripping surfaces may not hold the fastener properly. Replace damaged tools instead of risking fastener damage or injury.

Ignoring Torque Specifications

Some automotive and mechanical fasteners require precise tightening torque. Use a calibrated torque wrench when the service specifications require it.

Combination Wrench Maintenance Tips

Proper maintenance helps keep combination wrenches clean, accurate, and reliable.

  • Clean after use: Remove dirt, oil, and grease from the open and box ends.
  • Inspect the jaws: Check the open end for spreading and the box end for cracks or deformation.
  • Prevent corrosion: Keep tools dry and store them in a suitable toolbox.
  • Organize by size: Use a wrench rack or labeled storage system to separate metric and SAE sets.
  • Avoid misuse: Do not use a combination wrench as a hammer, pry bar, or substitute for an unsuitable tool.
  • Check ratcheting mechanisms: Keep ratcheting models clean and follow the manufacturer’s lubrication instructions.
  • Replace damaged tools: Stop using wrenches with damaged heads or handles.

Regular inspection is especially important for tools used frequently in professional workshops.

Frequently Asked Questions About Combination Wrench Sizes

What does a combination wrench size mean?

A combination wrench size refers to the width across the flats of the nut or bolt head that the tool is designed to fit. Both ends generally have the same nominal opening size.

What are the most common metric combination wrench sizes?

Common metric sizes include 8 mm, 10 mm, 12 mm, 13 mm, 14 mm, 15 mm, 17 mm, 19 mm, 21 mm, and 22 mm. The sizes needed depend on the equipment or vehicle being serviced.

What are the most common SAE combination wrench sizes?

Common SAE sizes include 1/4 inch, 5/16 inch, 3/8 inch, 7/16 inch, 1/2 inch, 9/16 inch, 5/8 inch, 11/16 inch, 3/4 inch, and 7/8 inch.

What is the difference between a combination wrench and a regular wrench?

A combination wrench has an open end on one side and a closed box end on the other. The open end provides side access, while the box end surrounds the fastener for a more secure grip.

Are metric and SAE combination wrenches interchangeable?

Not necessarily. Some sizes are close in dimension, but using the wrong system can create a loose fit and damage fasteners. Always use the exact specified size.

What is the difference between a 6-point and 12-point combination wrench?

A 6-point box end has six internal contact positions and is often preferred for demanding work on compatible hex fasteners. A 12-point box end has twelve positions, allowing engagement at smaller rotational intervals.

What size combination wrench do I need for a 10 mm nut?

A 10 mm combination wrench is designed for a compatible 10 mm hex nut. Confirm that the measurement refers to the width across the flats.

Is a combination wrench better than an adjustable wrench?

A combination wrench generally provides a more precise fit when its size matches the fastener. An adjustable wrench offers greater flexibility when working with different fastener sizes.

Can a combination wrench be used for tightening bolts?

Yes. A combination wrench can tighten and loosen compatible nuts and bolts. For fasteners with specific torque requirements, use a calibrated torque wrench for final tightening.

What is a ratcheting combination wrench used for?

A ratcheting combination wrench allows repeated turning without removing the tool after every short movement. It is useful in restricted spaces where a full handle rotation is not possible.

Conclusion

Choosing the correct combination wrench size is important for safe and effective mechanical work. The wrench opening must match the fastener’s width across the flats, while the handle length and head design should suit the available working space.

Metric sizes such as 8 mm, 10 mm, 12 mm, 13 mm, 14 mm, 17 mm, and 19 mm are common in many modern mechanical applications. SAE sizes such as 1/4 inch, 3/8 inch, 7/16 inch, 1/2 inch, 9/16 inch, and 3/4 inch are useful for inch-based fasteners.

Use this combination wrench size chart as a reference when selecting tools for automotive repairs, machinery maintenance, and general workshop tasks. Always match the exact fastener size, choose an appropriate 6-point or 12-point design, and follow the manufacturer’s instructions for safe use.